Recent Posts

Pages: 1 2 3 4 5 6 7 8 9 [10]
91
Hi,

I have a 2015 Toyota Landcruiser 4.5 V8TTD and recently purchased an UG MX. I have been looking for the manufacturer specific codes for transmission temp but have not been able to find any that work - I just get Err on the gauge. Can anyone point me in the direction of the manufacturer specific codes for this vehicle please? Also interested in any other manufacturer specific gauges that might be available.

Cheers,

Scott
92
Received the Blue Adapter recently and tried it out today on a BMW X3 F25 2011 2.0d - although the main vehicle will be a 2015 LR Puma Defender 2.2.

Initially struggled a bit to pair with the app on an iPad Air 1 - better to have the vehicle idling.

Took it for a test drive and the default gauges worked well - albeit in imperial values (I prefer metric values)

Switched off and later tried to input vehicle parameters - which on the app did not correspond to the vehicle parameters as when VIN was identified. Immediately had problems reconnecting/pairing - even though Bluetooth would be lit on Adapter and iPad would say connected - the app itself would effectively be disconnected. Eventually removed the "vehicle" from the app and restarted the iPad - which solved the problem.

Proceeded to update the Adapter to the latest version - 3 things of note here: do not leave the update screen until update completed - otherwise if you leave and return - the update starts from the beginning. This screen has 2 yellow bands - after update you will see the 2 "versions" abive the 1'st/top horizontal yellow band are the same. But on a previous/"back" on the main screen it seems the "main" version remains the same - currently mine displays 1.1.7

I appreciate the ease to remove the default gauges and also to recover them again - by a plain "long" press on the "gauge" part main screen - and also thereby to import a new screen - but how to arrange those gauges please - to get maximum amount of gauges per page in an eligible manner?

Thank you.
93
Ultragauge MX - Manufacturer specific gauges / Re: Preprogramming Question
« Last post by wildneg on November 19, 2015, 06:14:42 AM »
I did do the 'lookup' piece on the site and it gave me the list.  My main one was the exhaust elements (regen) and the boost.  Both appeared to be there for the 2015 Ram 1500 Ecodiesel.  Plus on the forums there, folks have them.  I just wanted to make sure there was no 'special' things that needed to be done. 

I appreciate the information.  I'm excited to get this!
94
Ultragauge MX - Manufacturer specific gauges / Re: Preprogramming Question
« Last post by UltraGauge Admin on November 18, 2015, 08:18:07 PM »
I'm not too sure what to select when purchasing for Preprogramming.  Since my 2015 Ram Ecodiesel is CAN compliant, should I just choose the generic 'General Motors (GM) with CAN (~2008+) or something different?
GM CAN, Ford CAN or Tacoma would all be equivalent in your case, and none of the codes would work for your vehicle....but would be a good starting point.   You'll need to confirm that there are codes available for your year, make, model and engine size.  Given that it is so new, there may not be any known codes

General MX FAQ: http://ultra-gauge.com/ultragauge/support/ultragauge-mx-FAQ.htm
95
Ultragauge MX - Manufacturer specific gauges / Preprogramming Question
« Last post by wildneg on November 18, 2015, 07:31:32 PM »
I'm not too sure what to select when purchasing for Preprogramming.  Since my 2015 Ram Ecodiesel is CAN compliant, should I just choose the generic 'General Motors (GM) with CAN (~2008+) or something different? 
96
UltraGauge Blue Bluetooth OBDII Adapter & Application / Re: UG Blue Not Powering Down
« Last post by is.chowa on November 17, 2015, 02:01:40 PM »
OK and Thanks
97
That is the correct behavior when the Blue Adapter is in ultra low power mode.
The icon LEDs require almost no power and could never drain your battery even if left on for a year.
98
Hello All

I have just received the UG Blue and have tried everything in the user manual but the attention icon and the Power icon remain on. I am concerned that over time the battery will deplete. Any suggestions?

Steve
99
UltraGauge Blue Bluetooth OBDII Adapter & Application / Re: Can it graph/datalog ?
« Last post by danny318 on November 05, 2015, 09:41:46 PM »
Is there plan to do sensor value vs RPM in a graph instead of vs time?  This would be highly useful

100
TCNTRL=0x93, the address is not included in the byte count
Pages: 1 2 3 4 5 6 7 8 9 [10]