Author Topic: Manufacturer specific codes for 2015 Toyota Landcruiser 4.5 V8TTD  (Read 5609 times)

Offline ScottK

  • Newbie Gearhead
  • *
  • Posts: 1
    • View Profile
Hi,

I have a 2015 Toyota Landcruiser 4.5 V8TTD and recently purchased an UG MX. I have been looking for the manufacturer specific codes for transmission temp but have not been able to find any that work - I just get Err on the gauge. Can anyone point me in the direction of the manufacturer specific codes for this vehicle please? Also interested in any other manufacturer specific gauges that might be available.

Cheers,

Scott

Offline cruiser200ttd

  • Newbie Gearhead
  • *
  • Posts: 1
    • View Profile
Re: Manufacturer specific codes for 2015 Toyota Landcruiser 4.5 V8TTD
« Reply #1 on: February 13, 2016, 01:06:11 AM »
Giday Scottk log on to LCOOL.org the landcruiser owners site in Aus.
There are 2 Automatic Transmission Temperature probes and they both give a different temperature reading as they are situated in different areas of the box.

The 1 we are interested in is the TFT # 2 sensor as this gives the higher temperature reading of the the 2 probes.
Code:

Transmission Temp #1 (*C)
Abbr1: TFT    Abbr2: 1*C
TDATA: 07E121D9000000
TCTRL: 92     RCTRL: 10
RPOS: 0810    MTCH: 210000
X: 0001 /: 0100 +: FFD8
Out Format: 00    Ave: 00
Left/Right: 32

Transmission Temp #2 (*C)
Abbr1: TFT    Abbr2: 2*C
TDATA: 07E121D9000000
TCTRL: 92     RCTRL: 10
RPOS: 1810    MTCH: 210000
X: 0001 /: 0100 +: FFD8
Out Format: 00    Ave: 00
Left/Right: 32


The LCOOL board doesn't like the degree symbol so have used * in its place. You can also name them whatever you want in the Abbr1 and Abbr2.

The above is my naming convention as I was testing both probes to see what readings I get and the relationship they have during different conditions. TFT is Transmission Fluid Temperature
Hope this helps cruiser200ttd

Offline benf39

  • Newbie Gearhead
  • *
  • Posts: 1
    • View Profile
Re: Manufacturer specific codes for 2015 Toyota Landcruiser 4.5 V8TTD
« Reply #2 on: February 20, 2016, 05:54:37 PM »
I have the ultra blue  In 200 TTD. I have tried putting in codes for trans temp on IPhone app. I go to custom gauge. Then type in info from lcool site for trans temp but cannot find a line for X: 0001 /: 0100 +: FFD8

And left/Right: 32


Ben


« Last Edit: February 20, 2016, 09:15:51 PM by benf39 »